- 1 INR
- 220 Volt (v)
- 500 Watt (w)
- Red and Blue, Silver
Pressure filters can apply a large pressure differential across the septum to give economically rapid filtration with viscous liquids or fine solids. The most common types of pressure filters are filter press. A filter press contains a set of plates designed to provide a series of chambers or compartments in which solids may collect. The plates are covered with a filter medium such as canvas cloth. Slurry is admitted to each compartment under pressure liquor passes through the canvas cloth and out a discharge pipe leaving a wet cake of solids behind. Plates and frames sit horizontally in a metal rack with cloth covering the face of each plate and are squeezed tightly together by a screw. Slurry enters at one end of the assembly of plates and frame. It passes through a channel running lengthwise through one corner of assembly. The set up consists of seven plates and six frames. Frames are covered with filter cloth. Feed is fed by gear pump at the top and filtrate collected at the bottom from each plate by operating the cock. After removing Cake washing and cleaning can be done by water provided by overhead tank. Inlet and outlet pressures are measured by pressure gauges. Rate of filtrate removals is measured by calibrated tank provided.
To study the operation of filter press in the laboratory.
To evaluate specific cake resistance and medium resistance.
- Telegraphic Transfer (T/T) Cash in Advance (CID) Cheque Cash Advance (CA)
- 1 Per Day
- 2-4 Week
- Western Europe Australia Eastern Europe Central America Africa Middle East South America Asia North America
- All India